Versalight  TM D
JTL CORPORATION
14747 ARTESIA BLVD., 3-G LA MIRADA, CA 90638
TEL: (714)670-6626 FAX: (714)670-8836
E-MAIL:
SERVICE@JTLCORP.COM


VersalightTMD (Digital) Series
As the newly developed JTL studio strobe systems, the Versalight D series has a combination of high-tech elements. It features infrared remote control, computerized memory, 360°„ digital display, and a variety of patented lighting designs. With different accessories, you can combine the features of the Versalight D series with a JTL remote controller and your personal computer°™you can use your computer to specify the exact lighting environment that you desire, and recreate previous lighting environments with the touch of a key. The Versalight D can be used with the remote control (Code: 2310), a computer, or simply alone, as a normal light (like a normal Versalight).
JTL Versalight D series is available in 100-130V, 60Hz and 220-240V, 50Hz (special order only).

Features:
- Digital adjustment and display on lighting functions
- 360°„ universal digital display and signal receiver for remote control
- Separate or simultaneous operation of up to 9 units of Versalight D with JTL PC software, transmitters, and receivers
- Exact reproductions of past lighting environments saved in your computer
- Two options to dump the power saved in capacitors: resistive (quiet) dump or flashing dump
- Alarm system: continuous audio signal warning of any malfunction, as well as a low power warning
- Built-in stabilizer for continuous output precision (°ņ0.1 F.)
- Digital power adjustment (separate or simultaneous) for strobe and modeling lamp
- Idle function to save electricity
- Detachable (customer-replaceable) flash tube with built-in diffuser
- Patented sliding-bracket to ensure light stability
- Built-in thermostat to avoid overheating
- Dual locking screws for studio rail system installation
- Aluminum alloy housing

Posterior Control Panel & Digital Remote Receiver

Versalight D Specifications


Code: 2300 Versalight D-1000
Output Power: 1000WS
Guide No.(ISO 100, Ft): 325
Flash Tube: Detachable Frosted (#2219)
Recharge Time: 0.5-3 Sec. In Full
Color Temperature: 5600K
Triggering: Computer with Transmitter, Remote Controller, Synch Cord & Test Button
Power Setting: 1/8 to Full Continuously w/Reference Display


Code: 2308-1 Versalight D-801
Output Power: 800WS
Guide No.(ISO 100, Ft): 275
Flash Tube: Clear Optidress Detachable (#3318)
Recharge Time: 0.5-3 Sec. In Full
Color Temperature: 5600K
Triggering: Computer with Transmitter, Remote Controller, Synch Cord & Test Button
Power Setting: 1/8 to Full Continuously w/Reference Display


Code: 2305-1 Versalight D-501
Output Power: 500WS
Guide No.(ISO 100, Ft): 230
Flash Tube: Clear Optidress Detachable (#3315)
Power Supply: AC 110 ®C 130V/60 Hz
Recharge Time: 0.5-3 Sec. In Full
Color Temperature: 5600K
Triggering: Computer with Transmitter, Remote Controller, Synch Cord & Test Button
Power Setting: 1/8 to Full Continuously w/Reference Display

Code: 2303-1 Versalight D-301
Output Power: 300WS
Guide No.(ISO 100, Ft): 195
Flash Tube: Clear Optidress Detachable (#2611)
Recharge Time: 0.5-3 Sec. In Full
Color Temperature: 5600K
Triggering: Computer with Transmitter, Remote Controller, Synch Cord & Test Button
Power Setting: 1/8 to Full Continuously w/Reference Display


General Accessories


Soft Boxes & Reflection Systems


Accessories for Versalight D:



Code: 2310
Digital Remote Controller (DRC)
Working together with the DRR, the JTL DRC allows you to use the Versalight D precisely from up to 36 feet away. It can control up to 9 Versalight D units separately or simultaneously, and has an idle function that is not available on rear control panel of your Versalight D.


Code: 2311
Digital Remote Receiver (DRR)
The DRR receives the signal from either the remote controller, or the transmitter. After installing the DRR to the top of light housing, turn on your Versalight D and the digital display will show you the light number and output reading that it is receiving. The 360°„ adjustable supporting holder ensures that the DRR always faces the signal resource (the DRR is included when you purchase a JTL Versalight D, but additional receivers can be purchased separately as well).















  Code: 2320
Computer Remote Accessory Kit
a. Computer Remote Transmitter (CRT)
The CRT receives signals from your PC, and in turn transmits up to nine different specifications to a total of 9 units°™each unit can include as many lights as you wish, each with a receiver attached (a unit is a group of lights all following the same specifications). Working together with DRR, your CRT will shift your lighting operation from a manual setting of specifications, to the computer keyboard. You may either send your remote control signal to each individual Versalight D after finishing your power setting specifically, or send them once as a whole for all Versalight D units. You may also save previous lighting specification files onto your hard drive and reuse the settings to replicate previous lighting scenes.

The Computer Remote Transmitter is best used mounted directly onto the ceiling, but can also be mounted on three types of JTL stands°™the background support stand, cinema stand (with a 40" extendable arm only°™not the 20"), and/or boom kit (Code: 5100). With the background stand, the CRT is screwed into the clamp (Code: 1024), which is then clamped onto the horizontal pole of the stand, above the shot. On the cinema stand, the CRT (screwed into the clamp) is clamped onto the extendable arm of the stand, which can then be extended out as far as you wish. Finally, with the boom kit, the CRT (also screwed into the clamp) is clamped onto the extendable arm, which can then be raised accordingly.

b. Supplementary Elements
These include a phone wire to link up the computer with the CRT, a power adapter for the CRT, and a free CD with the JTL Versalight D operation software.

Replacement Parts for Versalight D:
Code Description
2311
2219
2611
3315
3318
2519
2317
2820
2102
2223
2109
2107
2521
2520
2520-1
2115
2116


Digital Remote Receiver (DRR)
1000W Replaceable Frosted Flash Tube for D-1000 only
300WS Detachable Optidress Flash Tube for D-301
500WS Detachable Optidress Flash Tube for D-501
800WS Detachable Optidress Flash Tube for D-801
150W Modeling Lamp for D-1000 only, Base E-27
250W Modeling Lamp for D-1000 only, Base E-27
250W H.Q Modeling Lamp, Base E-14
150W H.Q. Modeling Lamp, Base E-14
Standard 7" Metal Reflector
Standard Power Cable
Stand Fixture (installed)
15" Synch Cord
Protective Cover for Versalight D-1000
Protective Cover
250V/5A Fuse
250V/8A Fuse

Versalight-D | Versalight-D Kit | Versalight-D180 | Versalight E | Versalight E Kit | Versalight J-160 | Versalight J-160 Kit | AC-SLAVE | Accessories

Copyright © JTL CORP. 2010. All rights are reserved.